• Home
• Products
  • Blackmer
    • Screw Compressors Bare Shaft
  • Bucher
    • Directional Spool Valves
  • Dinamic Oil
    • Hydraulic Winches
  • Elson
    • Speed Limiters
  • Hspenta
    • Front Mount
    • Light Duty & Agricultural
    • Penta Wet Kit
    • Underbody Cylinders
    • Accessories
  • Hydrocar
    • Axial Piston Pumps
    • Bent Axis Piston Pumps
    • Complete Hydraulic Kits
    • Gear Pumps
    • Hand Pump
    • Mechanical Controls
    • Pneumatic Controls
    • PTO
    • Valve Distributors
  • Hydroline
    • Custom Products
    • Filtration
    • Other products
    • Valves
    • Accessories
  • Hydroven
    • Ball Valves Flow Diverters
    • CETOP
    • Hydraulic Cylinders
    • Hydraulic Flow Dividers
    • Hydraulic logic blocks
    • Manual Pumps
    • Mini Control Units
    • Mech Elec Clutches
    • Motor Driven Pumps
    • Pump Over Gears Speed Red
  • Jurop
    • Air Cooled Vacuum Pump
  • Modenflex
    • Telescopic Cylinders
  • Muncie
    • PTOs
  • Pratissoli
    • Pumps
    • Accessories
  • PZB
    • Axial Piston Pumps
    • Bent Axis Piston Pumps
    • Complete Hydraulic Kits
    • Gear Pump
    • Hand Pump
    • Mechanical Controls
    • Pneumatic Controls
    • PTO
    • Valve Distributors
  • TWG
    • Planetary Winches/Hoists
    • Worm Gear Winches/Hoists
• Contact

Check out Hydrocar's latest range of products.
[ Read More ]

Check out Muncie's latest range of products.
[ Read More ]

We carry only the best brands in the industry.
[ Read More ]

air cooled vacuum pumps
PNE/R Series

Vacuum pump, sliding vanes type, cooled by natural/surrounding air for the PNE version, and with the addition of an air injection system for the PNR version (granting better cooling performances on heavy duty operation). Built in vacuum/pressure changeover valve, non-return valve, an oil tank and a pump for automatic lubrication; swivelling inlet/outlet manifolds are included in the assembly. Drive is available at 540 (with reduction gearbox) and 1200 rpm (direct).
This pump - line has been developed for an intermittent use on agricultural tankers and sewer cleaning equipments.

Available the following models according to the needed air flow:
- PNE/R72: 7.200 lt/min
- PNE/R82: 8.200 lt/min
- PNE/R102: 10.200 lt/min
- PNE/R122: 12.200 lt/min
- PNR142: 14.200 lt/min
Wide range of accessories for the vacuum line (recommended for the maximum protection of the pump from accidental infiltration in its insides of liquids or solids).

PN Series

Vacuum pump cooled by natural surrounding air. Built-in vacuum/pressure changeover valve, non-return valve, oil tank and pump for forced or automatic lubrication. Swivelling inlet/outlet manifolds are included in the assembly. Drive is available at 540/1000 (with reduction gearbox) and 1300 rpm (direct). A special version for pressure only, is also available (this is commonly used as compressor to empty the big irrigation hose reels before transportation).
This pump - line has been developed for an intermittent use on agricultural tankers.

Available the following models, according to the needed air flow:
- PN23: 2.600 lt/min
- PN33: 3600 lt/min
- PN45: 5400 lt/min
- PN58: 6500 lt/min
- PN84: 9000 lt/min
- PN106: 11000 lt/min
- PN140**: 13.850 lt/min
- PN155** – PN155R**: 15.200 lt/min (ballst port cooling available –R version- complete with special vanes for high temperatures)

**: Automatic lubrication included, with separated oil tank

Wide range of accessories for the vacuum line (recommended for the maximum protection of the pump from accidental liquids or solids infiltration).

Pr Series

Water cooled vacuum pump, equipped with an oil tank and pump for automatic lubrication. This pump is available with a direct drive system, only and can be run from 900 to 1200 rpm, depending of the model. Available also with hydraulic drive. Maximum vacuum rate 95%. Suitable i.e. recommended for continuous duty even at high vacuum levels. Low noise level on all models. This pump is designed for stationary industrial plants or for sewer cleaning, truck mounted, equipment. A wide range of accessories are available for the vacuum line, like for example vacuum/pressure changeover valve, non-return valve, air suction filter, aluminium manifolds, primary and secondary shutoffs (mild steel or stainless steel), etc. All these components are recommended for a safe use of the pump, avoiding accidental liquid/solids infiltration into the pump itself.

Available the following models, according to the needed air flow:
- P620R: 8000 lt/min
- PR150: 15.000 lt/min
- PR200: 20.000 lt/min
- PR250: 25.000 lt/min
- PR330: 33.000 lt/min
- PR530: 53.000 lt/min
Wide range of accessories for the vacuum line recommended for the maximum protection of the pump.

RV Series

Rotary vacuum pump with fan cooled housing. High resistance tangential vanes. Suitable for heavy duty operation.
.
1) High efficiency cooling fans.
2) Automatic lubrication with positive displacement lubricating
pump. Side mounted oil tank. Copper oil piping.
3) N°2 vanes inspection ports.
4) Built-in 4-way vacuum/pressure manifold.
Pneumatic actuation drive available.
5) Aluminium conveyors.

Gear motor hydraulic drive (upon request).

Dimensions:

Copyright © 2010 Interpump Hydraulics Asia Pte Ltd